(use-package corfu
  :custom
  (corfu-cycle t)                ;; Enable cycling for `corfu-next/previous'
  (corfu-auto t)                 ;; Enable auto completion
  ;; (corfu-separator ?\s)          ;; Orderless field separator
  (corfu-quit-at-boundary nil)   ;; Never quit at completion boundary
  ;; (corfu-quit-no-match nil)      ;; Never quit, even if there is no match
  (corfu-preview-current nil)    ;; Disable current candidate preview
  ;; (corfu-preselect 'prompt)      ;; Preselect the prompt
  (corfu-on-exact-match nil)     ;; Configure handling of exact
  ;; (corfu-scroll-margin 5)        ;; Use scroll margin

  ;; Enable Corfu only for certain modes. See also `global-corfu-modes'.
  ;; :hook ((prog-mode . corfu-mode)
  ;;        (shell-mode . corfu-mode)
  ;;        (eshell-mode . corfu-mode))
  ;; Use Company backends as Capfs.
  (setq-local completion-at-point-functions
              (mapcar #'cape-company-to-capf
                      (list #'company-files #'company-keywords #'company-dabbrev)))

  ;; Recommended: Enable Corfu globally.  This is recommended since Dabbrev can
  ;; be used globally (M-/).  See also the customization variable
  ;; `global-corfu-modes' to exclude certain modes.
  :init
  (global-corfu-mode))

;; Add extensions
(use-package cape
  :init
  ;; Add to the global default value of `completion-at-point-functions' which is
  ;; used by `completion-at-point'.  The order of the functions matters, the
  ;; first function returning a result wins.  Note that the list of buffer-local
  ;; completion functions takes precedence over the global list.
  (add-hook 'completion-at-point-functions #'cape-dabbrev)
  (add-hook 'completion-at-point-functions #'cape-file)
  (add-hook 'completion-at-point-functions #'cape-elisp-block)
  ;; (add-hook 'completion-at-point-functions #'cape-history)
  ;; ...
  )

;; Example configuration for Consult
(use-package consult
  ;; Replace bindings. Lazily loaded by `use-package'.

  ;; Enable automatic preview at point in the *Completions* buffer. This is
  ;; relevant when you use the default completion UI.
  :hook (completion-list-mode . consult-preview-at-point-mode)

  ;; The :init configuration is always executed (Not lazy)
  :init

  ;; Optionally configure the register formatting. This improves the register
  ;; preview for `consult-register', `consult-register-load',
  ;; `consult-register-store' and the Emacs built-ins.
  (setq register-preview-delay 0.5
        register-preview-function #'consult-register-format)

  ;; Optionally tweak the register preview window.
  ;; This adds thin lines, sorting and hides the mode line of the window.
  (advice-add #'register-preview :override #'consult-register-window)

  ;; Use Consult to select xref locations with preview
  (setq xref-show-xrefs-function #'consult-xref
        xref-show-definitions-function #'consult-xref)

  ;; Configure other variables and modes in the :config section,
  ;; after lazily loading the package.
  :config

  ;; Optionally configure preview. The default value
  ;; is 'any, such that any key triggers the preview.
  ;; (setq consult-preview-key 'any)
  ;; (setq consult-preview-key "M-.")
  ;; (setq consult-preview-key '("S-<down>" "S-<up>"))
  ;; For some commands and buffer sources it is useful to configure the
  ;; :preview-key on a per-command basis using the `consult-customize' macro.
  (consult-customize
   consult-theme :preview-key '(:debounce 0.2 any)
   consult-ripgrep consult-git-grep consult-grep
   consult-bookmark consult-recent-file consult-xref
   consult--source-bookmark consult--source-file-register
   consult--source-recent-file consult--source-project-recent-file
   ;; :preview-key "M-."
   :preview-key '(:debounce 0.4 any))

  ;; Optionally configure the narrowing key.
  ;; Both < and C-+ work reasonably well.
  (setq consult-narrow-key "<") ;; "C-+"

  ;; Optionally make narrowing help available in the minibuffer.
  ;; You may want to use `embark-prefix-help-command' or which-key instead.
  ;; (keymap-set consult-narrow-map (concat consult-narrow-key " ?") #'consult-narrow-help)
  )


(use-package consult-lsp
  :ensure t)

;; Enable vertico
(use-package vertico
  :custom
  ;; (vertico-scroll-margin 0) ;; Different scroll margin
  (vertico-count 10) ;; Show more candidates
  (vertico-resize t) ;; Grow and shrink the Vertico minibuffer
  (vertico-cycle t) ;; Enable cycling for `vertico-next/previous'
  ;; Option 2: Replace `vertico-insert' to enable TAB prefix expansion.
  ;; (keymap-set vertico-map "TAB" #'minibuffer-complete)
  :init
  (vertico-mode))

(use-package vertico-multiform
  :straight nil
  :after vertico
  :ensure nil
  :custom
  (setq vertico-multiform-commands
        '((consult-line buffer)
          (consult-imenu reverse buffer)
          (execute-extended-command flat)))

  (setq vertico-multiform-categories
        '((file buffer grid)
          (imenu (:not indexed mouse))
          (symbol (vertico-sort-function . vertico-sort-alpha))))
  :init
  (vertico-multiform-mode)
  )

(use-package vertico-posframe
  :after vertico-multiform
  :ensure nil
  :config
  (setq vertico-posframe-poshandler #'posframe-poshandler-frame-top-center)
  ;; (vertico-posframe-border-width . 10)
  ;; NOTE: This is useful when emacs is used in both in X and
  ;; terminal, for posframe do not work well in terminal, so
  ;; vertico-buffer-mode will be used as fallback at the
  ;; moment.
  ;; (vertico-posframe-fallback-mode . vertico-buffer-mode)
  :init
  ;; (require 'vertico-posframe)
  (vertico-posframe-mode 1)
  )

;; Persist history over Emacs restarts. Vertico sorts by history position.
(use-package savehist
  :init
  (savehist-mode))

;; A few more useful configurations...
(use-package emacs
  :custom
  ;; Support opening new minibuffers from inside existing minibuffers.
  (enable-recursive-minibuffers t)
  ;; Hide commands in M-x which do not work in the current mode.  Vertico
  ;; commands are hidden in normal buffers. This setting is useful beyond
  ;; Vertico.
  (read-extended-command-predicate #'command-completion-default-include-p)

  ;; TAB cycle if there are only few candidates
  ;; (completion-cycle-threshold 3)

  ;; Enable indentation+completion using the TAB key.
  ;; `completion-at-point' is often bound to M-TAB.
  ;; (tab-always-indent 'complete)

  ;; Emacs 30 and newer: Disable Ispell completion function. As an alternative,
  ;; try `cape-dict'.
  (text-mode-ispell-word-completion nil)

  ;; Hide commands in M-x which do not apply to the current mode.  Corfu
  ;; commands are hidden, since they are not used via M-x. This setting is
  ;; useful beyond Corfu.
  (read-extended-command-predicate #'command-completion-default-include-p)
  :init
  ;; Add prompt indicator to `completing-read-multiple'.
  ;; We display [CRM<separator>], e.g., [CRM,] if the separator is a comma.
  (defun crm-indicator (args)
    (cons (format "[CRM%s] %s"
                  (replace-regexp-in-string
                   "\\`\\[.*?]\\*\\|\\[.*?]\\*\\'" ""
                   crm-separator)
                  (car args))
          (cdr args)))
  (advice-add #'completing-read-multiple :filter-args #'crm-indicator)

  ;; Do not allow the cursor in the minibuffer prompt
  (setq minibuffer-prompt-properties
        '(read-only t cursor-intangible t face minibuffer-prompt))
  (add-hook 'minibuffer-setup-hook #'cursor-intangible-mode)
  )

(use-package hotfuzz)

;; Optionally use the `orderless' completion style.
(use-package orderless
  :custom
  ;; Configure a custom style dispatcher (see the Consult wiki)
  ;; (orderless-style-dispatchers '(+orderless-consult-dispatch orderless-affix-dispatch))
  ;; (orderless-component-separator #'orderless-escapable-split-on-space)
  (completion-styles '(hotfuzz orderless partial-completion basic))
  (completion-category-defaults nil)
  (completion-category-overrides nil))

(use-package marginalia
  :config
  (marginalia-mode 1))


;; Consult users will also want the embark-consult package.
(use-package embark-consult
  :hook
  (embark-collect-mode . consult-preview-at-point-mode))

(use-package embark
  :init
  ;; Optionally replace the key help with a completing-read interface
  (setq prefix-help-command #'embark-prefix-help-command)

  ;; Show the Embark target at point via Eldoc. You may adjust the
  ;; Eldoc strategy, if you want to see the documentation from
  ;; multiple providers. Beware that using this can be a little
  ;; jarring since the message shown in the minibuffer can be more
  ;; than one line, causing the modeline to move up and down:

  ;; (add-hook 'eldoc-documentation-functions #'embark-eldoc-first-target)
  ;; (setq eldoc-documentation-strategy #'eldoc-documentation-compose-eagerly)

  :config
  ;; Hide the mode line of the Embark live/completions buffers
  (add-to-list 'display-buffer-alist
               '("\\`\\*Embark Collect \\(Live\\|Completions\\)\\*"
                 nil
                 (window-parameters (mode-line-format . none)))))

;; Consult users will also want the embark-consult package.